Introduction:

This mod has been around since the early days of the MkIII MR2, but this picture always seems to get lost.  But here it is to stay for good - complete with nostalgic Photopoint banner.  The original source of the picture has been lost.  All I can remember is that it originally came from a TOyota service technician from the northern US.  If this is your picture or you know who the original poster was, let me know so I can give proper credit.

This is the wire to clip from the wiring junctions at the driver's side kick panel to disable the daytime running lights without affecting the brake warning light.  This picture is for US models - I'm not sure if the Japanese and/or European models even have DRL's that might need disabling.  The color of the wire on the 2000 models is *supposed* to be red with a yellow stripe, but these colors can change from year to year and even within a model year.  So be sure to check the wire's position before cutting.  I prefer to remove the pins from the harness and tape it to the wire bundle instead of cutting so that it may be reversed quickly.

.