Spyderflex Antenna

Article by  KenDude
iMR2 is currently offering a Group Buy in the Spyder Store on the new SpyderFlex antenna.  What is the SpyderFlex antenna? It is a Honda S2000 antenna that has been modified to work on the MR2 Spyder.  These antennas can be found in the Spyder Store at the following link: SpyderFlex
The antenna is easy to apply, simply unscrew your stock or other aftermarket antenna leaving behind the female threaded hole.  Next insert the Spyderflex antenna and hand tighten by screwing in with a clockwise motion.  Reception seems to be every bit as good as the stock Spyder antenna, and the Spyderflex is stiffer than the Radio Shack aftermarket antenna that it replaced shown in these pictures.  As with all articles, click on the images below to view a larger version.

DSC00033.JPG (68074 bytes)

Here is how the antenna arrives from iMR2, complete in original Honda packaging.

DSC00039.JPG (63916 bytes)

Here is the Radio Shack aftermarket flex antenna that was on the car.

DSC00040.JPG (48113 bytes)

Here are the two side by side

DSC00041.JPG (56051 bytes)

After removal of Radio Shack antenna

DSC00042.JPG (56339 bytes)

Insert new SpyderFlex antenna

DSC00043.JPG (59130 bytes)

Tighten by turning clockwise

DSC00051.JPG (53164 bytes)

New decal and SpyderFlex antenna

DSC00044.JPG (66596 bytes)

Finished product!