MR/S Aluminum Door Sill Install

Below are pictures of the aluminum door sill inserts from Japan that say MR/S on them.  Install is pretty straightforward.

DSC00002.JPG (102647 bytes)

Door Sills on the right, they look like skis!

DSC00013.JPG (85910 bytes)

Door sills prior to installation.

DSC00014.JPG (83750 bytes)

Each door sill comes in a plastic bag.

DSC00015.JPG (80945 bytes)

The back side has double stick tape on it, the same as the gas door emblem and many other parts.

DSC00016.JPG (83028 bytes)

The MR is written in black, the S in Red.

DSC00020.JPG (112737 bytes)

So simple I can peel it with my eyes closed!

DSC00021.JPG (114088 bytes)

Peel off all the red backing. Of course make sure the existing plastic piece is clean.

DSC00022.JPG (113251 bytes)

Line up the piece carefully, really not to hard.

DSC00023.JPG (99441 bytes)

Press down to make good contact with the double stick tape.

DSC00024.JPG (106498 bytes)

Presto it's done!

DSC00025.JPG (103482 bytes)

Door sill and gas door installed

DSC00026.JPG (78737 bytes)

Everyone should have a Spyder Man ball for their antenna! (Actually I took this off, it will be a giveaway at our next meeting!)

DSC00027.JPG (109490 bytes)

Passenger door install.

DSC00028.JPG (79073 bytes)

Nice and Shiny!

DSC00029.JPG (72696 bytes)

Included 3M wipe down rag

DSC00030.JPG (66782 bytes)

You are supposed to use this to wipe down the plastic before sticking the double stick tape to it. I tried it on a small area and noticed that it discolored the plastic, so I didn't use it.

DSC00042.JPG (75407 bytes)