Brian's car before the install.

We had to remove Brian's Toyota emblem.

Instead of using a hose, I used a soapy water solution in a spray bottle and the plastic spatula

Carefully work the spatula under the emblem, keep the area wet.

Remember the front emblem has pins so work from different angles.

Peeling off the emblem.

That awful sticky glue residue!

Cleaning off the residue with my fingers, we also used rubbing alcohol on it.

Polishing up the front end to remove some bug splats and imperfections.

Installing the first piece

Starting on the second piece

Brian's wing that he installed.

Alan working on the second piece.

Brian's TRD Logo, adds 5 HP!

Here's that old pesky Toyota emblem turned upside down to show the pins.

Alan starts on the 3rd piece

A new place for your MR2 logo!

Piece number 4, the lower sections.

Note the relief cuts and the way the piece curves around the body of the car.

Finishing up the lower piece

The piece wraps around, so here Alan is finishing up the wrap around portion.

Finally the inside scoop portion, the material protects this lip.

Passenger side lower piece

Smoothing out the piece!

Applying the last piece, the lip.

Alan and Brian with his car

The finished product

Brian gives the now popular "Thumbs Up" signal of approval!

Brian's car ready to roll!

Video of Alan preparing a piece to install.

Brian's Testimonial Video